Jump to content
  • 0

In the situation your computer takes a shit....


Question

Posted

Alright well im sure my computer has bit the dust because im not familiar with what to do/ or look for when having technical problems.

Ok, well all day Ive been able to run a game fine for 5 minutes or so but my games suddenley freezes indefinitley with no ability to Cntrl Alt Delete out of it. Which leaves me to hold the power button down till it shuts off. This happened to me today about O' 6 or 7 times. And Now. I press power and my computer attempts to start. But the moniter never switches on and only my tower is running.

**Edit** when i turn it on. The moniter gets a signal. But goes straight to powersaver and It wont emerge from it.

Ive checked all the connections and everything is snug. I opened up the case and theirs no visible damage so id have to be looking for something in particular if i was to find something wrong.

Im fuckin clueless and am lookin for some help. I just downloaded vista service pack 2 as well. But It was freezing before that so idk if that would be a helping factor in it?

Any help i can get is greatly appreciated.

Thanks Raiders.

12 answers to this question

Recommended Posts

  • 0
Posted

Well man, I am no computer expert and am definitely in way over my head. It seems unlikely to be a video card problem, which is a good thing, but this also means that it is a problem with something else. :cry:

I will ask a few friends and see what they say and get back to you.

  • 0
Posted

Actually, to me, this sounds very much a video card issue, if your monitor isn't detecting the video card at boot-up, that seems like a video card issue. Or, some part of your computer may be overheating. Personally, to start off, I would recommend the program CoreTemp to see if your overheating. Once you download the .zip, just run the .exe file, or extract then run, for future ease of use. You will see numbers on the bottom-right of your screen reading in Celsius.

  • 0
Posted

Sounds like you have a BIOS error thats stopping your computer from booting up all the way.

Power down your PC.

Locate a rocker-style switch at the back of your PC (if applicable), and switch it from the on position (I) to the off position (O).

Find the 3-pin jumper near the battery, typically labeled "clear cmos" or "reset bios".

Remove the jumper from the default position (typically connecting the 1st and 2nd pins).

Replace the jumper to connect the 2nd and 3rd pins.

Push the power button on the front of your PC once.

Wait a minute.

Return the jumper to its default position, connecting the 1st and 2nd pins.

Move the rocker-style switch at the back of your PC (if applicable), to the on (I) position.

Power on your PC with its front power button.

(List taken from wikihow)

And if that doesn't work tell me and I'll search around for something that will hopefully help.

  • 0
Posted

Thanks Kirk and Costa. Im gunna look into that core program right after doing what costa suggested. That could explain why my computer was freezing because of the inabiltiy to support the game. Coupled with overheating could have been a deadly combination.

Thanks again, Ill update you guys with what i find out.

**Edit**

Alright well i dont think my attempts were very successful. Costa, I dont see where there could be that switch you were talking about to flip to the off position. When i opened up the case and could also not find the markings where it described them to be. So i dont even know.

I would like to install that program to find the internal temperature. But until i get the moniter not getting a signal issue I cant do that.

  • 0
Posted

The switch he's talking about would be the switch next to the plug from your power supply to the wall socket. At least, that was my interpretation, and that should be turned off whenever you mess around in your computer, or the risk of shock hurting you or damaging the computer is greatly increased.

  • 0
Posted
The switch he's talking about would be the switch next to the plug from your power supply to the wall socket. At least, that was my interpretation, and that should be turned off whenever you mess around in your computer, or the risk of shock hurting you or damaging the computer is greatly increased.

i've fried a few printers. the best thing to do is after you unplug it turn the switch on so it uses the rest of the residual power up. you never know until you learn the hard way that touching a screwdriver to something even after it's unplugged can fry it

  • 0
Posted

No i havent fixed it. Now upon startup the fan revvs reaallllly fast and loud. Which i know is not ok.

The Greedy corporation known as dell. wont help me unless i pay em 50 bucks to run a test which enables them to tell me im going to have to pay hundereds more in parts because Of course its not something theyll furnish if they wont even cough up some credit for a diagnostic. I have a feeling this might be a lengthy ordeal.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Recent Posts

    • 2nd Platoon Weekly Attendance   Week of 09MAR2025   P = Present | E = Excused | A = Absent   Platoon Staff WO. A. Pitteway - Excused MSgt. J. Candy - Present TSgt. A Yoder - Present   1st Squad Squad leader:  TSgt. R. Fielding- Excused Cpl. B. Grande - Present Cpl. M. Noel - Excused Pfc. R. Smith - Present Pfc. C. Keebler - Present Pfc. D. Moffat - Present     2nd Squad Squad leader:  Sgt. S. Holquist - Present Cpl. T. Scary - Present Pfc. C. Marsh - Present Pfc. M. Oake - Excused Pfc. W. Swift - - Present Pvt. R. Zera - Present   Helpers:  Ret. A. Cannon
    • 2nd Platoon Weekly Attendance   Week of 02MAR2025   P = Present | E = Excused | A = Absent   Platoon Staff WO. A. Pitteway - Excused MSgt. J. Candy - Present TSgt. A Yoder - Present   1st Squad Squad leader:  TSgt. R. Fielding- Excused Cpl. B. Grande - Present Cpl. M. Noel - Present Pfc. R. Smith - Present Pfc. C. Keebler - Present Pfc. D. Moffat - Excused     2nd Squad Squad leader:  Sgt. S. Holquist - Present Cpl. T. Scary - Present Pfc. C. Marsh - Present Pfc. M. Oake - Excused Pfc. W. Swift - - Present Pvt. R. Zera - Absent II   Helpers:  Pfc. J. Arsenault   *Cannon, Clement, Whistle moved to reserves
    • Welcome to the 1st Marine Raider Battalion! Now that you have been accepted don't forget to: 1. Check in at the Recruit Depot 2. Read the Marine Raider Handbook (you are expected to know everything in it) 3. Change your steam friends Avatar 4. Download, install and log into Discord NOTE: Please be aware that you will not have access to the above links until an officer has given you full access to the forum. Access to the forum should be given to you within the next day.
    • MARINE CORPS ENLISTMENT OFFICE Camp Pendleton, CA   RECRUITMENT LETTER     Hello Derek Jeter, Thank you for taking interest in joining the 1st Marine Raider Battalion.   During your trial period the following will occur: Once accepted as a Recruit, you will remain as a Recruit for 2 weeks from the day of your acceptance until the next BCT Class is offered. During your time as a recruit, it is highly encouraged to play within the Public Server and join Discord with our other members. Upon acceptance, you will be contacted by one of our DIs when the next available BCT is scheduled via the appropriate Discord channel.   We have a BCT class every two weeks. Please keep an eye out for when the next one is made available once you've completed your time requirements!   Upon stating that you understand all the information here, an admin will change your forum name and login to be :   Jeter 1st MRB   Take the time now to change your Steam and in-game name to:   Rec. D. Jeter [1st MRB]     Please make sure to verify your forum account by checking your email. Also, please respond below with a reply showing that you have read and understand these rules. You cannot be fully accepted until you do so. We have a limit on the time to reply, if you do not do so within 48 hours, your application will be denied. Once you reply, you will be approved for your trial period unless otherwise posted.  
×
×
  • Create New...